Home / Building Stuff / New DIY Subwoofer 23
Homebuilt subwoofer. It's a 10" JL Driver, 12" passive radiator, and a 150W plate amp all in a 15.25" cube. Boom!
Sizing spreadsheet - the sub ended up about .25L small of the 40.02L that WinISD said I needed.
Visio design for the cabinet
5 sides of the box plus the internal bracing is in place
5 sides of the box plus the internal bracing is in place
Back side
Back side
Biscuit holes are cut for the front panel
My custruction supervisor Joey
Joey's wife Justy - moral support![Countersunk hole for the 10" driver. The edges have been rounded over.](_data/i/galleries/building/diy10sub/CIMG0112-th.jpg "Countersunk hole for the 10" driver. The edges have been rounded over. (337 visits)")
Countersunk hole for the 10" driver. The edges have been rounded over.![Countersunk hole for the 12" passive radiator](_data/i/galleries/building/diy10sub/CIMG0113-th.jpg "Countersunk hole for the 12" passive radiator (310 visits)")
Countersunk hole for the 12" passive radiator
Countersunk mounting hole for the plate amp
Primer paint coat #1 is on
First coat of black is on
First coat of black is on